Countertop | Floor | Wall

Jet Setter Dusk

Part of: Stone Attache TREAD Pavers Xteriors Program

Ambassador

Inspired by fine-grained quartzite found in the Swiss Alps, the Ambassador series lends high-end styling wherever it’s used. Large format sizes in four handsome colors make this a natural choice for design in commercial and residential spaces.

Go To Application Info>

Go To Technical Specifications>

Go To Durability Chart>

Want to see this product in person? Where to buy

Roll over image to zoom

Additional Colors

Jet Setter Dusk Rectangle

Color Code: AM34

Thickness: 5/16

Size: 12X24

Finish: Light Polished

Shade Variation: V3: High

Country of Origin: United States

Jet Setter Dusk Rectangle

Color Code: AM34

Thickness: 5/16

Size: 12X24, 24X48

Finish: Matte

Shade Variation: V3: High

Country of Origin: United States

Jet Setter Dusk Xterior Paver

Color Code: AM34

Thickness: 13/16

Size: 16X48

Finish: Textured

Shade Variation: V4: Random

Country of Origin: Italy

Jet Setter Dusk Square

Color Code: AM34

Thickness: 5/16

Size: 24X24

Finish: Matte

Shade Variation: V3: High

Country of Origin: United States

Jet Setter Dusk Random Linear

Color Code: AM34

Thickness: 5/16

Size: Random Linear

Finish: Matte

Shade Variation: V3: High

Country of Origin: Mexico

Application

	Target Dcof Wet	Suitable
Dry & Level - Interior Floor	N/A	✔
Wet & Level - Interior Floor	≥0.42	✔
Shower Floors (Residential or Light Commercial)	≥0.42
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)	≥0.60	✔
Ramps & Inclines	≥0.65
Walls/Backsplashes	N/A	✔
Countertops	N/A	✔
Pool Linings	N/A
Grout Joint Recommendation: 1/8"
● A DCOF value of greater than or equal to 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF. ● Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
Application Notes: ● Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.